If you have been reading pitcher boxes closely, you already know the awkward part: the big names in this category advertise chlorine, lead and taste improvements, while the word fluoride shows up in fine print or not at all. The honest starting point for a roundup of the best water filter pitchers for fluoride is that no pitcher we found carries NSF/ANSI 58 certification, the standard that actually covers fluoride reduction. What we can do is rank pitchers by how close their published filtration media and certifications get to removing it.
We spent weeks comparing six pitchers on the only three things that matter for fluoride: what media is actually inside the cartridge, what third party has tested that media, and how many gallons you get before you pay for another one. We read every specification sheet and every review theme that came back with each product, then cross-checked the certification claims against what NSF/ANSI 42, 53 and 58 cover.
The short version: the pitchers that genuinely target fluoride use either nanofiltration, bioceramic media or affinity filtration. The pitchers that drop your total dissolved solids and improve taste mostly do it with carbon and ion exchange, which are built for chlorine and hardness, not for a dissolved fluoride ion. We explain why in detail below, and we flag which products make a fluoride claim without a matching certification.
If you are still deciding whether you need any of this, our [guide to water softeners for well water](https://beatcopgame.com/best-water-softeners-for-well-water/) covers the other end of the spectrum for households on untreated well supply. And if your real problem is volume rather than contamination, the [water dispensers roundup](https://beatcopgame.com/best-water-dispensers/) is the right read.
Top 3 Best Water Filter Pitchers for Fluoride (October 2026)
Epic Nano XP 10 Cup
- Nanofiltration
- 150-gallon cartridge
- Tested to NSF/ANSI 4253401P231P473
Clearly Filtered 10 Cup
- Affinity filtration
- Targets 386+ contaminants
- 100-gallon cartridge
All Six Water Filter Pitchers Compared in 2026
| Product | Specifications | Action |
|---|---|---|
| Epic Nano XP 10 Cup Pitcher |
|
Check Latest Price |
 Santevia MINA Alkaline 9-Cup Pitcher |
|
Check Latest Price |
| Clearly Filtered 10 Cup Pitcher |
|
Check Latest Price |
 Alkanatur Bioceramic Pitcher |
|
Check Latest Price |
 Reshape Water RWP-1 10-Cup Pitcher |
|
Check Latest Price |
 Waterdrop WFD-02L 35-Cup Dispenser |
|
Check Latest Price |
1. Epic Nano XP – Nanofiltration and a 150-Gallon Cartridge
Epic Nano XP | Water Filter Pitchers for Drinking Water | 10 Cup | 150 Gallon Filter | Gravity Water Filter (Black & Bamboo)
Nanofiltration
Gravity-fed
150 gallon filter life
10 cup Tritan
2.2 lbs
Pros
- Nanofiltration media is built to catch dissolved contaminants rather than just chlorine
- 150 gallon cartridge covers the longest filter life in this group
- BPA-free Tritan body that fits refrigerator shelves
- Built-in change filter indicator
- Tested against NSF/ANSI 42
- 53
- 401
- P231 and P473
Cons
- Replacement cartridges are a recurring cost with no stated annual figure
- Costs more than entry-level carbon pitchers on the shelf
- No remineralisation stage
- so water can taste flat
The Epic Nano XP is the only pitcher in this group built around nanofiltration, which is the mechanism closest to reverse osmosis that still fits in a fridge-door pitcher. Fluoride is a dissolved ion, and nanofiltration membranes are designed to hold back dissolved species, so this is the media story we wanted to see in a pitcher rather than a carbon block story.
Our most asked question about this one is simply how long a cartridge lasts, because that is where the pitcher’s economics land. The published figure is 150 gallons, which at a typical two-to-three liter daily pour works out to roughly a year between changes. Buyers in the reviews single out that cartridge life and the NSF standard testing as the two reasons they bought it.
Ownership details are unusually pleasant. It weighs 2.2 pounds and measures 7 by 7 by 12 inches, so it slides onto a standard refrigerator shelf, and the built-in change filter indicator removes the guesswork from replacement timing. Reviewers mention the fridge fit and the improved taste more than almost anything else.
The honest limitation is certification language. Epic lists testing against NSF/ANSI 42 and 53 along with 401, P231 and P473, which is a broader list than most competitors publish, but the listing does not show an NSF/ANSI 58 line for fluoride. That means the strong filtration claim rests on manufacturer testing rather than a fluoride-specific certification an NSF mark would verify.
What you should check before buying
Check that 150 gallon cartridge figure against your own household’s drinking water volume, because a family of four will use that rating far faster than a single person. If your municipality fluoridates at a normal level and you simply want to reduce intake, this pitcher’s nanofiltration approach is the most structurally sound of the jug options.
Also check whether you can live with water that tastes stripped of minerals. There is no mineralisation stage to put calcium and magnesium back, which is the same trade-off that shows up on every TDS-to-zero pitcher.
Who will be disappointed by it
Anyone who wants a certified fluoride number to point at will not find one here, and buyers who care most about the lowest annual cartridge spend will find this pitcher carries a higher ongoing commitment than the entry-level carbon options.
The filter indicator is helpful but not exact, so if you top up the pitcher constantly, treat the 150 gallon figure as the real schedule rather than the light on the lid.
2. Santevia MINA – Two-Stage Filtration With Mineral Addition
Santevia MINA Alkaline Water Filter Pitcher | 9-Cup at Water Filter System That Adds Minerals and Makes Alkaline Water | Fluoride, Chlorine and Lead Water Filter | American Filtration Media
Two-stage filter plus minerals
9 cup
2 liters
pH raised up to 2.0 units
30 day guarantee
Pros
- Two-stage design filters and adds minerals in a single pass
- Raises pH by up to 2.0 units
- Adds calcium
- magnesium and potassium back into the water
- Manufacturer claims fluoride
- chlorine and lead reduction
- Backed by a 30-day money-back guarantee
Cons
- Fluoride reduction is a manufacturer claim with no NSF 58 listing
- Filter replacement interval is not clearly stated
- Standard plastic rather than medical-grade Tritan
- Smaller reservoir than most pitchers in this group
The Santevia MINA is the pitcher people buy when the taste of tap water is the thing they are trying to fix. Its filtration story is a two-stage process that filters and then mineralises, adding calcium, magnesium and potassium while raising pH by up to two units. That is a meaningfully different design from every drop-in cartridge on this list.
For fluoride specifically, Santevia lists fluoride alongside chlorine and lead as a reduction target on the product itself. That is a manufacturer claim rather than a certification, and the pitcher does not show an NSF/ANSI 58 mark. Read it as a plausible claim from a media stack that includes a mineralisation stage, not as a verified percentage.
Reviewers are almost unanimous that the taste difference is real, and several mention drinking more water as a direct result of it. The guarantee also lowers the risk on a product where the filtration chemistry is not fully transparent.
The recurring friction point is replacement timing. Buyers report genuine confusion about how often the cartridge should be swapped, and the listing itself does not state a filter life figure. That is a documentation gap, not a performance complaint, but it will cost you money over time if you guess wrong.
What you should check before buying
Decide whether mineral addition is a feature or a problem for you. If you filter for fluoride and then want the calcium and magnesium back in the water, the MINA is one of only a few pitchers here designed to do exactly that in one pass.
Check your storage situation too. At 8.5 by 5 by 10 inches with a 2 liter capacity, it is a compact pitcher, and the smaller reservoir means more refills than a 35 cup dispenser.
Who will be disappointed by it
Households that have moved off bottled water and want a large reservoir will find 2 liters limiting. Anyone who needs a certified contaminant reduction figure rather than a manufacturer claim should look at the Clearly Filtered instead.
Plastic construction is another soft spot for buyers trying to reduce contact with synthetic materials, and no one in the reviews describes this housing as medical-grade.
3. Clearly Filtered 10 Cup – The Broadest Contaminant Claim
Clearly Filtered Water Filter Pitcher, 10 Cup BPA Free Water Filtration
Affinity filtration
80 fl oz
Targets 386+ contaminants
100 gallon cartridge
2.8 lbs
Pros
- Widest contaminant list we saw in a pitcher
- with 386 plus named
- Affinity filtration uses ionic binding and preserves beneficial minerals
- NSF certified to standards 42 and 372
- Independently tested by EPA-accredited laboratories
- Removal rates published for each contaminant
- Medical-grade Tritan that is BPA and BPS free
Cons
- Cartridge cost is higher than standard carbon filters
- Requires priming with the supplied bag before first use
- Lowest average rating in this group with a notable share of one-star reviews
- Larger footprint eats refrigerator shelf space
Clearly Filtered takes the transparent-lab-data approach, publishing removal figures per contaminant rather than asking you to trust a marketing phrase. The 10 cup model uses proprietary affinity filtration built around ionic binding, and the company lists fluoride alongside lead, PFAS, arsenic, microplastics, pharmaceuticals and VOCs among the 386 plus contaminants it targets.
The important detail for fluoride is that the NSF certification here covers standards 42 and 372. Those are aesthetic and material-contact standards, which tell you the water tastes better and the plastic does not leach, but they are not the fluoride standard. So you get excellent documentation and real lab work without a certified fluoride percentage.
What reviewers like most is the published data and the feel of the materials. Parents and health-focused households show up repeatedly in the reviews, and the non-leaching medical-grade Tritan housing is a genuine advantage if you are filling bottles for a toddler.
What reviewers like least is the running cost. The cartridge is more expensive than a standard carbon filter, and the 4.1 average rating across more than a thousand reviews is the lowest here, with the complaints clustering around price, pitcher size and the first-use priming step rather than around filtration results.
What you should check before buying
Account for the 100 gallon cartridge in your budget. That is roughly four months of daily use on the manufacturer’s schedule, and it is the number to multiply by when you compare annual cost against the longer-life options here.
Plan the first fill. The pitcher ships with a priming bag and needs that step before the first glass, so read the instructions before you pour anything you plan to drink.
Who will be disappointed by it
Buyers who want the largest reservoir in a fridge will not get it here. At 10.87 by 5.25 by 11.4 inches it is one of the bigger footprints on this list, and a few owners mention the shelf-space trade-off directly.
Anyone who reacts badly to flat or mineral-poor water should know that affinity filtration preserves minerals by design, which is a genuine plus, but the taste is still filtered water and not something like the Santevia’s mineralised output.
4. Alkanatur – Bioceramic Media and No Ion Exchange Resin
Alkanatur Water Filter Pitcher, Removes Fluoride/PFAs, Adds Magnesium
Bioceramic plus carbon media
1.4 liters
UNE 149101:2025 certified
105 gallon cartridge
pH 8.5 to 9.5
Pros
- Certified to UNE 149101:2025
- a rigorous European drinking water standard
- Uses bioceramic media with no ion exchange resin and adds no sodium
- Adds up to 18mg/L of magnesium while raising pH to 8.5-9.5
- Claims 99 percent plus removal of fluoride
- PFAS
- chlorine
- metals and microplastics
- Independent tank keeps filtered and unfiltered water separate
- 105 gallon cartridge
Cons
- Smallest capacity here at 1.4 liters
- Filters about 1 liter every 4 minutes so it suits lower daily volumes
- Three filter formula options can be confusing at reorder time
- Replacement cartridges are a separate purchase
The Alkanatur is the most interesting chemistry on this list for fluoride, because it sidesteps the ion exchange resin entirely. Its media is activated carbon, activated vegetable charcoal and a patented bioceramic compound, and the company states plainly that no ion exchange resin and no sodium are involved. For readers who want alkalised water without the sodium trade, that is the headline.
Fluoride reduction is a stated 99 percent plus claim, backed by UNE 149101:2025 certification and by study work at Vigo University in Spain, plus CE, RoHS and SGS marks. As always, a European certification is not the same as an NSF/ANSI 58 line on the listing, so treat it as the most rigorously documented fluoride claim here without a US certification attached.
The antioxidant angle comes up constantly in the reviews, with the pitcher producing water at up to -350 mV ORP and the CAM system delivering a 77.7 percent antioxidant efficiency figure. Owners also like that the tank design keeps filtered water separate from the untreated reservoir.
It carries a one-year manufacturer warranty and the box includes a BPA-free water bottle, which reviewers call a useful extra. Three different filter formulas let you match the media to your water, and that flexibility is genuinely useful for hard water areas.
What you should check before buying
Measure your daily water volume first. At 1.4 liters this is the smallest pitcher here, and filtering roughly 1 liter every 4 minutes means it is built for someone drinking a few glasses a day rather than a household filling bottles.
Decide how you feel about three cartridge types. Matching the formula to your water is a real benefit, but it is also a decision to make twice a year when you reorder.
Who will be disappointed by it
Large households will refill this constantly. Anyone sensitive to added minerals should know it pushes magnesium up to 18mg/L and alkalinises to a pH of 8.5 to 9.5, which is a strong change from neutral tap water.
If you need a US certification mark rather than a European one for your records or your landlord, this listing will not satisfy that requirement.
5. Reshape Water RWP-1 – Six Stages and the Cheaper Cartridges
Reshape Water 10- Cup Pitcher with 6-Stage Filter. Removes Fluoride, Chlorine, Lead, and Other Volatile Organic Compounds. Increases PH. Improves Taste. Replacement Filters Cost 25% to 33% Less.
Six-stage media
3.5 liter reservoir
300 liter filter life
SGS certified
ABS body
Pros
- Replacement cartridges cost 25 to 33 percent less than comparable pitchers
- Six media types in one cartridge including FIR balls and ion exchange resins
- SGS certified filters independently tested by a US laboratory
- Largest reservoir among the standard pitchers at 3.5 liters
- Raises pH and adds magnesium
- potassium
- calcium and sodium
Cons
- New cartridges stall until shaken to release air bubbles
- Reservoir leaves water sitting above the filter intake
- Spill-prone pouring spout
- Lowest maximum TDS rating in this group at 300 ppm
The Reshape RWP-1 wins on cost of ownership, which is the part of this category that most guides skip. The manufacturer states that replacement filters run 25 to 33 percent cheaper than the cartridges used by comparable pitchers, and at 79 gallons per cartridge that is the kind of number that adds up quietly over a year.
The media stack is six stages in one cartridge: FIR balls, ion exchange resins, activated carbon, negative potential particles and minerals. Fluoride reduction is listed alongside chlorine, lead and VOCs. With ion exchange resins in the mix, treat this as a multi-purpose claim rather than fluoride-specific engineering.
The most common complaint has nothing to do with filtration. A fresh cartridge will trickle or stall until you take it out and shake it to release trapped air, and owners report learning that trick through trial and error rather than from the instructions.
A few buyers also report residual chlorine taste after filtering, and one review notes that the filter countdown indicator stopped working after two changes. Capacity is a genuine strength at 3.5 liters, which suits heavy daily use in a single fridge.
What you should check before buying
Check your water hardness against the 300 ppm maximum TDS rating. This is the lowest ceiling in the group, so very hard source water can shorten cartridge life and make taste worse rather than better.
Know the air bubble fix before you need it. If your first glass stalls on day one, the cartridge almost certainly needs shaking, not discarding.
Who will be disappointed by it
Buyers trying to reduce plastic contact will find ABS construction rather than Tritan, and the reservoir design leaves treated water sitting above the filter intake between uses.
If you want the taste result to be obvious in a glass of water, note that this pitcher also adds sodium as part of its mineral stage, which the sodium-free options avoid.
6. Waterdrop WFD-02L – 35 Cups for a Household That Drinks Water All Day
Waterdrop WFD-02L 35-Cup Water Filter Dispenser, Fluoride Reduction, Black
35 cup reservoir
Carbon block
150 gallon cartridge
Gravity-fed
BPA free
Pros
- Largest reservoir in this roundup at 35 cups
- Claims 90 percent plus fluoride reduction plus PFOA and PFOS
- Upgraded carbon block improves taste and odour
- 150 gallon cartridge covers far more than a standard 40 gallon filter
- Front section slides out so you can fill bottles without pulling the unit from the fridge
Cons
- Cartridge can dry out and stop flowing unless soaked before refills
- Flow slows noticeably for high volume households
- Tall 14.37 inch footprint may require lowering a fridge shelf
- Only one spare cartridge included in the box
The Waterdrop WFD-02L is a dispenser rather than a pour-through pitcher, and that changes the use case completely. A 35 cup reservoir means a family can refill twice and still have water for cooking, formula and drinks through a long day, which is the failure mode of the smaller jug designs.
Fluoride is the headline claim here at 90 percent plus, alongside chlorine, rust, PFOA and PFOS reduction from an upgraded carbon block. Carbon block is not fluoride-specific media, so read that claim as a real published figure but not a certified one.
Owners report faster flow than the pour-through pitchers they replaced, and the slide-out front section for filling bottles is the detail reviewers mention most warmly. Taste improvements show up in comments about tea, coffee and lemonade.
The cartridge is the weak point. Several owners note that if the carbon block is allowed to dry out it stops passing water until soaked and agitated, and one reviewer called that a design flaw rather than a maintenance issue.
What you should check before buying
Measure your fridge door shelf height first. At 5.54 by 9.95 by 14.37 inches this is the tallest unit we covered, and one reviewer had to lower a shelf to make it work.
Count how many people drink filtered water daily. Below three people the reservoir is oversized and the cartridge may sit in standing water longer than you would like.
Who will be disappointed by it
Single-person households will not finish 35 cups between changes, and anyone who wants glass or Tritan rather than plastic will find no option here.
With only 196 reviews on this listing, you have less long-term owner feedback to draw on than the other five. Budget for the possibility that the flow behaviour takes some adjustment.
Do Any Water Filter Pitchers Actually Remove Fluoride?
Direct answer: none of these six carries NSF/ANSI 58 certification, which is the US standard that covers total dissolved solids reduction and includes fluoride. The pitchers that come closest use media structurally capable of holding dissolved fluoride, and the rest rely on manufacturer claims.
The reason most pitchers fail at fluoride is chemistry, not quality control. Fluoride is dissolved in the water at roughly 0.7 mg/L in most US systems, well below the EPA maximum contaminant level of 4.0 mg/L and its 2.0 mg/L health advisory goal. It exists as a charged ion in solution, which means a standard activated carbon block does almost nothing with it. Carbon is built to adsorb organic compounds, chlorine and many VOCs, and fluoride simply passes through.
Ion exchange resin is the other common mechanism, and this is where the marketing gets misleading. These resins exchange ions for hardness reduction and drive TDS meters toward zero, which produces a measurable drop on the meter dial. But they are not engineered to select fluoride out of the water, so a TDS reading is not a fluoride reading. Buyers who watch the TDS number drop often assume fluoride reduction is complete. It is not.
The media that genuinely adsorb fluoride are activated alumina, a porous aluminium oxide compound, and bone char, a calcium-rich carbon. Reverse osmosis membranes remove fluoride as a side effect of rejecting nearly everything dissolved. Nanofiltration sits between the two. That is why the Epic Nano XP with its nanofiltration and the Alkanatur with its bioceramic and carbon stack are the two picks in this roundup where the media choice makes fluoride removal plausible rather than incidental.
One more confusion worth clearing up: activated alumina removes fluoride, and it is not the same thing as the dissolved aluminium that other filters target. The two are unrelated, which is why a filter can legitimately reduce fluoride without claiming to reduce aluminium, or the reverse.
How to Check the Fluoride Level in Your Own Water First
Before spending money, find out whether your water actually needs this. Fluoride levels vary enormously between utilities, and in many communities the number is well under the advisory goal, which makes a pitcher an unnecessary purchase.
Step one, pull up your utility’s Consumer Confidence Report. Every US community water system publishes one annually, and the fluoride section gives you a measured number for your specific system rather than a national average.
Step two, if your supplier does not publish one or serves a small system, call the county health department or the state drinking water program. They can usually tell you the last reported result.
Step three, if you want a number for your particular tap rather than the system average, use a certified laboratory. This matters in older buildings with different plumbing, and for anyone on a private well where no report exists at all.
Step four, if you just want a rough screen, an at-home fluoride test strip costs very little and tells you whether you are dealing with a high number or a trivial one before you commit to a cartridge schedule.
Families with babies and toddlers
If you are preparing infant formula, this is the section that matters most. Excess fluoride exposure in children under eight is associated with dental fluorosis, and public health guidance around formula preparation has been the subject of sustained debate. Check your local health department guidance rather than relying on internet summaries, and filter the water you use for formula rather than assuming your pitcher handles it.
Our [portable pitchers buying guide](https://beatcopgame.com/best-portable-pitchers-mounds/) covers another angle on moving between filtered and unfiltered water throughout the day.
What to Look for Before You Buy a Fluoride Filter Pitcher
Start with media type, because it is the only spec that predicts fluoride performance. Nanofiltration, activated alumina, bone char and reverse osmosis all have a real mechanism for holding dissolved fluoride. Carbon blocks and ion exchange resins do not, no matter what the box says.
Next, read certification labels precisely. NSF/ANSI 42 covers taste, odour and sediment, so it is an aesthetic standard. NSF/ANSI 53 covers health effects including lead. NSF/ANSI 58 covers total dissolved solids reduction, which is where fluoride appears. WQA Gold Seal is a separate programme, and certifications like UNE 149101, SGS and CE are third-party marks that are meaningful but are not NSF verification.
Then work out the annual cartridge cost before you commit. Take the replacement price divided by the stated gallon life and multiply by your household’s drinking water volume. A 150 gallon cartridge and a 40 gallon cartridge look very similar on the shelf and very different over three years.
Capacity and flow rate are the two things people regret. Pour-through designs take twenty minutes or more to filter a full jug, which is the most common reason people quietly stop using them. Dispensers with a 30-plus cup reservoir filter faster but take up a tall fridge footprint.
Finally, consider chloramine. Roughly half of US cities disinfect with chloramine rather than chlorine, and carbon media that has been used up holds onto chloramine more effectively than chlorine. On a chloramine system, replace cartridges on schedule rather than waiting for taste to change.
When a Pitcher Is Not the Right Answer
If your Consumer Confidence Report shows fluoride near or above 2.0 mg/L and you want verified removal, a pitcher is a compromise, not a solution. Under-sink reverse osmosis systems hold NSF/ANSI 58 certification routinely and are the standard escalation step, and whole-house treatment matters if you also want every tap covered rather than one jug at a time.
Our [RV water hose guide](https://beatcopgame.com/best-rv-water-hoses-for-drinking-water/) covers the travel and emergency side of drinking water, which is a separate problem from contaminant removal at home.
Frequently Asked Questions
Do Brita filters catch fluoride?
No. Brita pitchers rely on activated carbon and ion exchange resin, which are built for chlorine, sediment and hardness. Carbon does not adsorb fluoride and the resin is not engineered to select it out of solution. A TDS meter can drop after a Brita filter while fluoride levels barely move. If fluoride is your reason for filtering, look for nanofiltration, activated alumina or bone char media instead.
Which water filter jugs remove fluoride?
The jugs that remove fluoride use media with a real mechanism for it. The Epic Nano XP uses nanofiltration, the Alkanatur uses bioceramic and carbon media with no ion exchange resin, and the Clearly Filtered uses affinity filtration that binds dissolved ions. All three make fluoride claims without NSF/ANSI 58 certification, so treat the percentages as manufacturer figures rather than verified ones.
Does a Brita filter get rid of fluoride?
Not meaningfully. Standard Brita cartridges are carbon plus ion exchange, and neither targets fluoride. The Elite and Everyday versions differ in carbon amount and filter life, not in their ability to remove dissolved fluoride. If you want fluoride reduction, changing to a higher-end Brita is not the move. Choose a pitcher built around nanofiltration or bioceramic media, or move to an under-sink reverse osmosis system with NSF/ANSI 58 certification.
Are BRITA water filters effective?
Yes, for what they are designed to do. Brita filters are effective at reducing chlorine taste and odour, sediment and some heavy metals, and they are among the most widely certified pitchers for those claims. The mismatch happens only when a buyer assumes a chlorine-and-taste filter also handles fluoride. Judge a filter against its certified contaminant list rather than its reputation.
How to tell if a Brita water filter is bad?
Look for a chalky or filmy finish, water that tastes flat and has lost its chlorine taste entirely, or a noticeably slower flow than when it was new. Check the manufacturer change indicator, then compare the date the cartridge was installed against the stated filter life in gallons. If you have exceeded the gallon rating, replace it regardless of how the water tastes, because spent carbon releases what it absorbed.
The Bottom Line on Water Filter Pitchers for Fluoride in 2026
Our pick for the best water filter pitchers for fluoride is the Epic Nano XP, because nanofiltration is the closest thing to a fluoride-capable mechanism that fits in a fridge-door pitcher and its 150 gallon cartridge keeps the running cost reasonable. Go with the Clearly Filtered if you want published per-contaminant lab data, and with the Alkanatur if you want sodium-free alkalised water with the most rigorous certification on this list.
Before you buy any of them, read your Consumer Confidence Report. If your utility is well under the 2.0 mg/L advisory goal, a good chlorine filter may be the entire answer. If the number is high and you want it verified, move up to an under-sink reverse osmosis system with NSF/ANSI 58 certification rather than trusting a pitcher claim. Our [complete water feature guide](https://beatcopgame.com/best-water-features/) covers the equipment side if you go that route.